The Top 24 Roof Drip Edge Manufacturers

Last updated on September 24, 2023

Roof drip edges are crucial to ensure proper drainage and prevent water damage to your roof, and in this article, we’ll explore some of the top manufacturers in the market.

Your roof’s drip edge may not be something that most homeowners think about, but it is an essential component of your roofing system. This small piece of metal flashing helps protect the edges of your roof from water damage and directs water away from your home’s foundation.

However, not all drip edges are created equal. If you’re in the market for a new roof or need to replace your existing drip edge, it pays to know which manufacturers produce top-quality products that will stand the test of time and keep your home safe from water damage.

In this blog post, we’ll take a closer look at some of the best roof drip edge manufacturers and what sets them apart from their competitors.

Quality Edge

Manufacturer: qualityedge.com

Facebook page: Facebook

Services provided:

  • Provides high-quality drip edge perimeter flashing
  • Offers durable and easy-to-install roofing accessories
  • Offers a wide range of drip edge options
  • Helps prevent issues with ice backup and wood rot
  • Provides smart and innovative perimeter flashing solutions for every project.

Quality Edge is a leading manufacturer of roofing accessories, with a particular emphasis on drip edge perimeter flashing. Their products are not only highly durable but also easy to install, ensuring that water is directed away from fascia and rake trim for a professional appearance.

With thousands of options available, Quality Edge offers smart, innovative solutions that meet the needs of any project.

GAF

Manufacturer: gaf.com

Contact phone: (240) 385-1164

Services provided:

  • Pre-fabricated coping, fascia, drip edges, gutters, downspouts, and trim
  • Available in both steel and aluminum
  • Variety of Kynar®-coated colors

GAF is a leading manufacturer that offers pre-fabricated coping, fascia, drip edges, gutters, downspouts and trim in steel and aluminum with a variety of Kynar-coated colors. The company provides commercial roofing solutions to its clients by appointing certified roofing contractors.

ATAS International, Inc.

Manufacturer: atas.com

Contact phone: (800) 468-1441

Services provided:

  • Offers a Drip Edge system in a variety of materials, gauges, and colors
  • Provides 12′ lengths of Drip Edge with interior splice plates and required ring shank nails for easy installation
  • Offers custom fabrication capabilities for job-specific needs, including radiused sections and accessories
  • Provides options for fabricated and sealed or welded and PVDF painted products to match over 40 PVDF stock colors
  • Offers industry expertise and technical support, including design and development assistance, product specification guidance, and installation support.

ATAS International is a leading manufacturer of drip edge systems that provides a wide range of materials, gauges, and colors to meet every client’s needs. Their pre-punched with slotted fastener holes and interior splice plates simplify installation while their custom fabrication capabilities ensure job-specific needs are met.

With over 40 PVDF stock colors to choose from, clients can rest assured they’ll get the best results for their project.

Franklin Southern

Franklin Southern roof drip edge manufacturer
Manufacturer: franklinsouthern.com

Facebook page: Facebook

Services provided:

  • Specializes in manufacturing essential roofing accessories for the roof system
  • Offers a variety of drip edge profiles including FHA Drip Edge, 90° Roof Edge, and T Style – F5
  • Provides top-of-the-line materials and cutting-edge production technologies
  • Ensures complete satisfaction with highly qualified team
  • Offers a credit application and career opportunities

Franklin Southern Manufacturing LLC is a Florida-based company that specializes in manufacturing high-quality roofing accessories, particularly drip edge profiles. They use top-of-the-line materials and advanced production technologies to guarantee complete satisfaction for their clients.

KM Sheet Metal

KM Sheet Metal roof drip edge manufacturer
Manufacturer: kmsheetmetal.com

Facebook page: Facebook

Services provided:

  • Standard profile roof drip edge flashing metal
  • Customized flashing metal manufacturing based on provided sketches
  • Fast shipping within 2-3 days
  • Full-service manufacturing and distribution facility
  • Wide range of products and services, including roofing supplies and accessories

K&M Sheet Metal and Gutter Supply is a full-service manufacturer and distributor of roofing, sheet metal, and accessories. Thanks to their wide range of products, they pride themselves on their ability to complete difficult or unique jobs and requests.

If you need something custom-made, send them a sketch with all the relevant information for a quote within 2-3 days.

Metal-Era, LLC

Manufacturer: metalera.com

Contact phone: (800) 558-2162

Facebook page: Facebook

Services provided:

  • Drip Edge products in Kynar version
  • Quick-to-ship convenience
  • Economical pricing
  • 10-Year, 90 MPH Wind Warranty
  • Division 7 CSI Specification Guide for Fascia with Flashing (Gravel Stop and Drip Edge)

Edge Systems One is a reliable manufacturer of quality roof drip edges. They offer a range of products to suit various requirements, and their Kynar version drip edge is an economical option that provides quick shipment and ease of installation without compromising on quality.

Their products come with 10-year wind warranty to give customers peace of mind.

Riverside Sheet Metal & Contracting, Inc.

Facebook page: Facebook

Services provided:

  • Custom fabrication of drip edge flashing metal parts to any measurements and angles
  • Manufacturing of radius drip edge flashing metal and matching any profile
  • Providing drip edge metal for general contractors, roofers, and do-it-yourself home owners
  • Offering special pricing for large quantities
  • Fabricating drip edge flashing metal parts with white aluminum, bronze aluminum, and copper

Riverside is a reliable manufacturer of high-quality custom drip edge metal flashing for any roofing system. They offer a wide range of sizes, angles and materials to fit the specific needs of their customers, whether they are contractors or homeowners.

With their attention to detail and competitive pricing, Riverside is the go-to choice for all your drip edge needs.

FLAMCO

Manufacturer: flamco.com

Contact phone: (800) 634-3937

Services provided:

  • Manufactures regionally-specific metal roofing products
  • Offers drip edges, flashings, valley, and vents
  • Provides product drawings, photos, approvals, and instructions on location-specific product pages
  • Offers additional information on the Resources page of their website
  • Provides a dedicated web page for FLAMCO Bead & Lath products.

FLAMCO is a leading manufacturer of regionally-specific metal roofing products in the Southeastern United States. With strategically-located manufacturing facilities in Jacksonville and Waco, FLAMCO provides a wide range of high-quality products such as drip edges, flashings, valley, and vents to its customers across multiple states.

Visit their location-specific product pages for detailed information on available products.

Tamlyn

Tamlyn roof drip edge manufacturer
Manufacturer: tamlyn.com

Facebook page: Facebook

Services provided:

  • Style “D” Roof Edge product with various sizes and materials
  • Water management solutions
  • Conventional metal products
  • XtremeColor Flashing
  • Custom color options for products

This roofing drip edge manufacturer produces durable and functional products for effective water management on roofs. Their Style “D” Roof Edge is available in various lengths and sizes, made of standard galvanized steel or custom colors and helps protect fascia board and shingles from water damage.

They also offer other useful products like XtremeTrim, XtremeInterior, and more for a complete roofing solution.

Builders Straight Edge Products

Services provided:

  • Manufacturing custom and standard drip edge
  • Offering drip edge in three thicknesses: .012, .019, and .024
  • Providing drip edge with 6 different drip legs: 1”, 1 ¼”, 1 ½”, 1 5/8”, 1 ¾”, and 2”
  • Offering vented drip edge with a large profile going up the roof
  • Providing drip edge in various colors: white, royal brown, black, clay, wicker beige, almond, and light bronze (territone)

This company manufactures custom and standard drip edge products designed to funnel water away from roof edges and prevent wood rot. With a range of thicknesses, drip legs, and colors available, they offer aluminum vented drip edges that meet industry standards for durability and performance.

Metal Roofing Systems

Facebook page: Facebook

Services provided:

  • Perimeter Edge Metal Systems
  • Secure Lock Drip Edge for low slope roof applications
  • Tested to meet ANSI/SPRI ES-1 standards
  • Wide range of available materials and finishes
  • Wind warranties up to 150 mph with ANSI/SPRI ES-1 Certified Analysis

Perimeter Edge Metal Systems is a manufacturer of high-quality drip edge products for low slope roof applications that meet ANSI/SPRI ES-1 standards. They offer a variety of materials and colors, as well as wind warranties up to 150 mph with an ANSI/SPRI ES-1 Certified Analysis.

Rafferty Aluminum & Steel Co., Inc.

Manufacturer: raffertyaluminum.com

Services provided:

  • Manufacturing of roof drip edges
  • Offering a variety of part numbers for different types of roof drip edges
  • Providing retail UPC codes for easy identification and tracking of products
  • Collaboration with multiple manufacturers such as Berger and Lamb & Ritchie
  • Offering a wide range of retail products for customers to choose from

This company is a manufacturer of roof drip edges, with a wide variety of parts available. Their products are created by trusted manufacturers such as Berger and Lamb & Ritchie, ensuring high quality and reliability.

Drip Edge Roofing

Drip Edge Roofing roof drip edge manufacturer
Manufacturer: dripedgeroofing.com

Facebook page: Facebook

Services provided:

  • Residential roofing
  • Gutter installation
  • Apartments and MDU roofing services
  • Commercial roofing
  • Specialty roofing

Drip Edge Roofing is a reliable and trustworthy roofing contractor specializing in residential and commercial roofing services. With fair prices, full coverage insurance, and comprehensive services, they offer outstanding results that are tailored to each project’s unique needs.

Dynaclad Edge Metals

Dynaclad Edge Metals roof drip edge manufacturer
Manufacturer: dmimetals.com

Contact phone: (534) 856-1586

Services provided:

  • DynaClad® Edge Drip Edge System with continuous steel or aluminum cleat for easy installation and proper positioning
  • Pre-punched with fastener holes for convenience
  • Incorporates a standard 3” deep, 90° roof flange that accepts stripped-in membrane roofing products
  • Offers a choice of over 32 colors with a DynaClad® 70% Full Strength PVDF Paint Finish
  • Provides a range of roof systems and panels, including Span-Lock, Tee-Lock, Inter-Lock, Double-Lock, Ultra-Lock, Snap-On-Seam, Batten-Seam, Nail-Strip, Tapered-Seam, Curved Radius, Compound-Curve, Flat-Lock, Horizontal Wall Panel – 16″, Horizontal Wall Panel – 12″, Flush Panel FP, Flush Reveal FR, Exposed Fastener Panel, and Mitered Corner.

DynaClad® Edge is a reliable, Customer-preferred manufacturer of roof drip edge systems offering sturdy and easy-to-install cleats for accurate placement. Their painted drip edges come in various colors, and their system accepts membrane roofing products, which can make the process of installing more straightforward for contractors while ensuring that the roofing lasts longer.

Metal-Era, LLC

Manufacturer: sweets.construction.com

Contact phone: (800) 558-2162

Facebook page: Facebook

Services provided:

  • Custom engineering of Anchor-Tite Drip Edge
  • Superior performance of Anchor-Tite Drip Edge
  • Attractive appearance of Anchor-Tite Drip Edge
  • Manufacture of sheet metal flashing and trim
  • Manufacture of manufactured gravel stops and fasciae

Metalera is a leading manufacturer of high-quality roofing accessories, including drip edges and membrane roof accessories. Their patented Anchor-Tite Drip Edge combines superior engineering with an attractive appearance to provide the best protection against wind uplift damage.

With a lifetime warranty, Metalera’s products are built to last and stand up to even the harshest weather conditions.

Holcim Elevate

Manufacturer: holcimelevate.com

Contact phone: (800) 428-4442

Facebook page: Facebook

Services provided:

  • Superior performance for the life of the roof system
  • Simplifying the process from takeoffs, quoting, fabricating, packaging, and efficient installations
  • Engineered to tight tolerances and tested to meet ANSI/SPRI/FM 4435/ES-1 building code standards for wind uplift nationwide
  • All necessary fastening equipment included
  • ES-1 Contractor Edge System Program for self-fabrication of ES-1 edge systems

This roofing product manufacturer offers metal edge products engineered to tight tolerances and tested to meet ANSI/SPRI/FM 4435/ES-1 building code standards for wind uplift nationwide. They collaborate with elevate partners such as Metal Era, Hickman Edge Systems, and offer the ES-1 Contractor Edge System Program designed to simplify the edging process for RedShield contractors while providing a 20-year limited warranty.

Dave’s Sheet Metal

Services provided:

  • Manufacturing shingle or slate roof flashing with overhanging component and outward projecting lower edge
  • Providing hemmed edges for strength
  • Offering stock sizes in F5, F7, and F8
  • Providing custom sizes, gauges, colors, and finishes upon request
  • Offering related products such as Cleat/Hook Strip, Extension Drip Edge, Commercial Drip Edge, and Deck Ledger.

This manufacturer produces durable and versatile drip edge products for shingle or slate roofs. Stock sizes are available in various materials and colors, with the option to customize dimensions, gauges, finishes, and more upon request.

Their website indicates that they offer a range of related products as well.

Roll Forming Machines LLC

Roll Forming Machines LLC roof drip edge manufacturer
Manufacturer: rollformingmachine.us

Services provided:

  • Produces high-quality drip edge roll-forming machines
  • Offers a range of drip edge machines
  • Provides metal flashing parts with speed and precision
  • Ensures water-resistant and non-corrosive drip edge for durability
  • Helps manipulate water flow to prevent water damage and deterioration

This company specializes in manufacturing drip edge machines that provide roofing businesses with high-quality metal flashing parts produced with speed and precision. Drip edge is essential in manipulating water flow on roofs to prevent water damage and deterioration, making it widely incorporated into building designs to benefit all homeowners looking to protect their property.

Mule-Hide Products Co., Inc.

Mule-Hide Products Co., Inc. roof drip edge manufacturer
Manufacturer: mulehide.com

Contact phone: (800) 786-1492

Facebook page: Facebook

Services provided:

  • Provides visually appealing termination
  • Profiles can be custom fabricated to meet most specifications
  • Offers different materials such as EPDM, TPO, PVC, and ModBit
  • Available in Kynar® colors, see color chart
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements

The Drip Edge is a trusted manufacturer of roof drip edges providing maximum water flow along with visually appealing termination for EPDM, TPO, PVC and ModBit roofs. Their high-quality profiles can be customized to meet different specifications and available in 10′ lengths.

Hickman Edge Systems

Contact phone: (618) 866-8285

Services provided:

  • Recovery solution to the roofing community’s present problem
  • Increased manufacturing capabilities and expanded capacity
  • Cost savings passed directly to customers
  • Five featured products and QuickShip program
  • ANSI/SPRI/FM 4435 ES-1 tested and FM Approved fascia system for virtually any commercial roofing assembly

Hickman is a well-established manufacturer of high-quality roof drip edges. With their increased manufacturing capabilities and expanded capacity, they are able to provide cost savings directly to customers in the roofing community.

Their featured products include five types of fascia systems such as TerminEdge, PermaSnap and other related products, offering superior protection from wind and water penetration.

Caliber Metals

Caliber Metals roof drip edge manufacturer
Manufacturer: calibermetals.com

Facebook page: Facebook

Services provided:

  • Manufactures aluminum, copper, and galvanized drip edges
  • Offers a variety of sizes for drip edges, including 1″, 1.25″, 1.5″, and 2″
  • Provides economy and extended options for some drip edge sizes
  • Offers spec sheets for each product for easy reference and information
  • Manufactures aluminum rake edges in 1″x2″ size

This manufacturer offers a diverse range of roof drip edge and rake edge products made from aluminum, copper, and galvanized materials. They provide detailed specifications for each of their products on their website and offer an easy download option for spec sheets.

MetalRoofingScrews.com

Contact phone: (696) 405-9255

Services provided:

  • High-quality 26 gauge steel drip edge flashing with a 40-year paint finish
  • Multiple color options available to match your home
  • Easy to install 5 FT sections with matching metal roofing screws, 1/4″ hex bit driver, and gloves included
  • Custom sizes and shapes available
  • Free shipping on all orders in the lower 48 states

This company is a leading manufacturer of high-quality and durable Drip Edge Flashing made with 26-gauge steel and a 40-year paint finish. With multiple colors available, easy installation, and free shipping; they offer custom sizes and shapes to cater to all kinds of roofing projects.

Rollex

Rollex roof drip edge manufacturer
Manufacturer: rollex.com

Contact phone: (201) 903-2815

Facebook page: Facebook

Services provided:

  • High-quality and durable drip edge products for roofs
  • Virtually maintenance-free products that can be easily cleaned with water
  • Industry-leading limited lifetime warranty for all products
  • Environmentally friendly products that can be recycled indefinitely
  • Wide range of drip edge options available in different materials, gauges, lengths, and profiles to suit different roofing needs.

Rollex is an industry-leading manufacturer of roof drip edges that are designed to ensure water runs off the roof’s edge and into the gutters. Their products offer unbeatable durability, require low maintenance, are environmentally friendly, and backed by a limited lifetime warranty.

Union Corrugating Company

Manufacturer: unioncorrugating.com

Facebook page: Facebook

Services provided:

  • Manufacturing and supplying aluminum drip edge for metal roofing
  • Providing painted and unpainted aluminum flashing rolls
  • Offering aluminum roll flashing for various applications
  • Providing aluminum roll flashing for valleys, chimneys, fascia, endwalls, sidewalls, and many others
  • Offering aluminum roll flashing in widths ranging from 6″ to 20″ and up to 50′ in length.

Union is a manufacturer of roof drip edge products including aluminum roll flashing and drip edge for metal roofing. Their products are field-formed and used in various areas of a home to provide protection against leaks and water damage.

They offer a range of painted and unpainted aluminum rolls up to 50 feet in length.

Related